Spreader Tool, adjustable, with Wedges 1 + 2 + 4 + 5

Features and Benefits:

• Suitable for suspension strut clamping bores and suspension joint mounts.
• Enables the professional expansion of the suspension strut clamping bore or the lower support joint receiver
• In order to be able to pull out stuck shock absorber units or support joints without damageAdvantages:
• For clamping bore gap of 2 - 16 mm!
• No jamming of the expanding tool!



In order to be able to pull stuck shock absorber units out of the steering knuckle clamping bore or suspension joints out of the lower suspension joint mounting without damage, it is absolutely necessary to widen the clamping bore properly with an expanding tool. The expansion tool set enables both the suspension strut clamping bore and the lower suspension joint mount on the front axle to be expanded professionally. Required, for example, when changing the spring, the shock absorber and the suspension joint. The floating bolts prevent the expansion tool from tilting, and the special expansion wedge with stop prevents the clamping bore from expanding too much. This prevents damage to the cast or aluminium steering knuckle housing or other chassis components due to unprofessional removal and installation attempts. Due to the variably adjustable spreading head, even vehicles where the clamping slot is offset off-centre pose no problem!